How To | Changing the CDN64 Dante Audio Bridge card IP address
Learn how to change the IP address of a CDN64 Dante Audio Bridge card to use in audio networks.
If you are not finding the results you need and still have questions, submit a request using the form below and our Tech Docs team will get right on it. Our goal is to provide the content you need!
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
To change the CDN64 card IP address:
- Download the Dante Controller software from: https://www.audinate.com/products/software/dante-controller
- Install the software on a PC on the same network (IP subnet) as the Dante card.
- Start Dante Controller and click on the Device Info tab. Then double-click on Dante card once it is discovered.
- Click on the Network Config tab. Change the IP address settings within the address section and click Apply.
The computer running Audinate Dante Controller must be configured to the same IP subnet as the CDN64 card. Try changing the computer to this IP address and subnet: 169.254.0.50 / 255.255.255.0.