FAQ | Which Attero Tech devices support AES67?
Discover which Attero Tech devices offer AES67 compatibility and how to use it.
Answer
In 2017, Attero Tech introduced a new line of endpoint and interface products that natively support AES67. Any endpoint product that begins with the "unA" prefix utilizes Attero Tech's own AES67 implementation. These products are known to be compatible with QSC Q-SYS Core DSPs and with Dante products running in Dante-AES67 mode (other devices may also be compatible with Attero Tech AES67 devices. Contact Attero Tech for confirmation).
During the course of 2018, AES67 support also became available for endpoint products based on Dante hardware. All Attero Tech endpoint products that begin with the "unD" prefix use Dante hardware and some of those, but not all, support AES67.
The following list identifies all Attero Tech products that support AES67 based on Attero Tech's AES67 implementation:
- unA6IO-BT
- unAX4I
- unAX2IO+
- unAIO2X2+
- unA6IO
- Axon A4FLEX
- Axon A8Mio
- Axon A4Mio (available late Q4 2019)
The following list identifies all Attero Tech products that support AES67 based on the Dante-AES67 interoperability implementation.
- unD4O (see note)
- unD6IO-BT (see note)
- unDX2IO+ (see note)
- unHX2D (see note)
- unDUSB (see note)
- Zip4 (see note)
- Zip4-3G (see note)
- unD32
- Synapse D32i
- Synapse D32o
- Synapse D16Mio
- Synapse DM1
- Axon D2FLEXio
Note
Dante devices using the “Ultimo” platform must be built with an “UltimoX” or “UltimoX4” processor to support AES67. Devices built with a regular “Ultimo” or “Ultimo4” cannot and will not support AES67.