FAQ | What is the cable that ships with the MP-M40 and MP-M80 used for?
Find out what the cable that comes with the MP-M40 and MP-M80 is used for.
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
Answer
The cable that ships with the MP-M series mixer is a 15 inch (381 mm) cable with 6-pin Euro Blocks wired to each end.
The purpose of this cable is to function as an interconnect cable between the zone outputs of the MP-M (Mixer) and the line inputs of MP-A (Amplifier). Each cable carries two channels of balanced audio from the mixer to the amplifier.
Cable part number is WC-004089-01.