FAQ | Can I use two Core 510i processors with different I/O cards in redundant mode?
Learn how to configure two Core 510i processors with different I/O cards for redundant operation.
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
Answer
Mismatched hardware between redundant Cores is not tested or supported. Always use two identically configured Cores for redundancy. Although Q-SYS Designer does allow you to push a design where the hardware does not match between redundant Cores, during a failover, the secondary Core will show a "slot X wrong type" fault. There is no way to suppress this error.
For more information see the Core Redundancy topic in Q-SYS Help.