How To | Enable External Control on DCP-100/300 via Ethernet

Learn the steps necessary to control a DCP-100/300 device remotely over an Ethernet connection.

Updated at June 8th, 2023

+ More

Procedure

If you can't Control DCP-100 externally via Ethernet, it is because DCP's require network password enabled to accept network commands, and run in version 3.0.0 or higher.

You will need to establish a USB connection first to enable this field.

networking setup dcp-100/300 enable dcp ethernet connection external control

Contact TechDocs

How To | Enable External Control on DCP-100/300 via Ethernet

Contact TechDocs

Procedure

Related Articles