Troubleshooting | After firmware update, Core freezes on Q-SYS logo screen
Discover solutions to resolve a Q-SYS system freezing after a firmware update.
If you are not finding the results you need and still have questions, submit a request using the form below and our Tech Docs team will get right on it. Our goal is to provide the content you need!
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
|Hardware Model/Series||Core processors|
After firmware update, Core freezes on Q-SYS logo screen
In rare instances, a Q-SYS Core processor can require a power cycle following a firmware update.
Solution | Workaround
If the Core is frozen showing the "Q-SYS Systems" logo on the front panel, follow these steps:
- In Q-SYS Designer Software, click Cancel for the firmware update.
- Disconnect power from the Core and wait 30 seconds.
- Reapply power to the Core.
Once the Core boots, it should move from Idle to Running status and indicate the new firmware version. If the design does not show as Running, save and run the design to the Core from Q-SYS Designer Software.