Tech Note | RoomSuite Modular System Connection Guide
Discover how to effectively connect and configure the RoomSuite Modular System for optimal performance and user experience.
Information
This article will cover the basic connections and settings for the Q-SYS RoomSuite Modular System.
Connections
RMP-100 Processor
See the RMP-100 connections as shown below. For more hardware information, see the RMP-100 User Manual.
QIO-VEN4 Expander
See the QIO-VEN4 connections as shown below. For more hardware information, see QIO-VEN4 User Manual.
Endpoint Options
Q-SYS RoomSuite is customizable with the following endpoint limitations.
| Endpoint Series | Maximum Quantity |
|---|---|
| NL-SB42 | 2 |
| NL-C4 & NLP4 | 4 |
| NC Series Cameras | 2 |
| TSC Series Touch Screen Controllers | 2 |
| NM Series Microphones | 4 or 3+1 Dante Microphone |
| Dante-Enabled Third-Party Microphones | 1 |
Example Setups
BYOD
This example room is optimized for users who bring their own laptops.
- Users connect their laptop to the QIO-VEN4 USB-C port, or to USB-C + HDMI if the laptop does not support DisplayPort Alt Mode.
- The RMP-100 HDMI output connects directly to the room display.
- RoomSuite Modular System provides in room AV controls and manages the connected peripherals automatically.
UC Compute / Controller
This example room is applicable for:
- Microsoft Teams Rooms with third-party controller and Q-SYS Connect for second page experience
- Zoom Rooms with third-party controller and the Q-SYS Control for Zoom Rooms app for second page experience
UC Compute + TSC
This example room is applicable for:
- Zoom Rooms with Q-SYS TSC controller and Q-SYS Connect to enable meeting controls and Q-SYS Control for Zoom Rooms app for second page experience
