FAQ | Is the Q-SYS NV-32-H network video endpoint capable of decoding a network stream from a Q-SYS PTZ-IP conference camera?
Discover if the Q-SYS NV-32-H endpoint can be used to decode network streams from a Q-SYS PTZ-IP conference camera.
If you are not finding the results you need and still have questions, submit a request using the form below and our Tech Docs team will get right on it. Our goal is to provide the content you need!
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
In Q-SYS Designer 9.5 and higher, NV-32-H (Core Capable) devices in Core Mode, as well as NV-32-H devices configured as Encoders or Decoders, support the ability to receive Mediacast streams from Q-SYS cameras (NC Series and PTZ Series) for output to a connected HDMI display.
For support details, schematic examples, property and control definitions, as well as troubleshooting tips, see the HDMI I/O (NV-32-H) topic.
For systems running versions previous to 9.5, the following steps are needed to send cameras via NV-32-H.
In order for the Q-SYS NV-32-H network video endpoint to decode a network stream from a Q-SYS PTZ-IP conference camera and output to a monitor via HDMI, a user must connect the HDMI output of the Q-SYS PTZ-IP conference camera to the HDMI input of a NV-32-H (set as an encoder). The camera's network stream would then be available to any NV-32-H (set as a decoder) on the network.