FAQ | Can I connect the HDMI out of the PTZ-IP camera to the Q-SYS NV-32-H network video endpoint (set as an encoder) and route that anywhere on the network?
Find out if you can send the video output of your PTZ-IP camera to the Q-SYS NV-32-H encoder and route it over your network.
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
Answer
Yes, this is the recommended method for transporting Q-SYS PTZ Camera video for HDMI distribution. The Q-SYS NV-32-H network video endpoint currently cannot decode the IP stream from Q-SYS PTZ cameras for HDMI distribution. However, the USB type B connector on the NV-32-H delivers Q-SYS PTZ conference camera feeds and Q-LAN audio channels to connected PC's, similar to the functionality of a Q-SYS I/O-USB Bridge.