How To | Setting a static IP address on Attero Tech devices

Discover how to easily assign your Attero Tech device a static IP address.

Updated at January 16th, 2024

Your engagement helps us create the content you need. Click here to review this article.



Procedure


Learn how to configure IP addresses with either Dante devices or AES67 devices.

Dante Devices

  1. Switch the PC's network interface that connected to the Dante network to obtain a dynamic IP address.
  2. Open Dante Controller
  3. Once the device appears, double-click on device name to open Device View window
  4. Switch to Network Config tab
 
 

AES67 Devices

  1. Switch the PC's network interface that connected to the audio network to obtain a dynamic IP address.
  2. Open unIFY and switch to the AES67 tab
  3. Once the device appears, double-click on device name to open its configuration plug-in
  4. Switch to Stream/Device Configuration tab