How To | Control a Sennheiser TeamConnect Ceiling 2 mic with Q-SYS
Learn how to control the Sennheiser TeamConnect Ceiling 2 mic with Q-SYS, enabling you to fully utilize the microphone's capabilities.
If you are not finding the results you need and still have questions, submit a request using the form below and our Tech Docs team will get right on it. Our goal is to provide the content you need!
Your engagement helps us create the content you need. Click here to review this article.
Table of Contents
When trying to control the Sennheiser TeamConnect Ceiling 2 mic with Q-SYS from either Command Buttons or Block Controller, make sure to change the control type from TCP to UDP.
Sennheiser documentation states: "UDP/IP is the standard transport for all devices with an Ethernet interface or another interface typically used for internet connectivity. All those devices MUST implement the UDP/IP transport for SSC". Additionally, Sennheiser uses UDP port 45 for control.
The transport type for connections in Block Controller and Command Buttons must be changed to UDP.