How To | Connecting to a second remote IP subnet for VoIP lines

This article will show you how to extend VoIP service by connecting to a second remote IP subnet.

Updated at May 3rd, 2023

Your engagement helps us create the content you need. Click here to review this article.

Table of Contents


If you have already set a Gateway on one of your Core's LAN ports to communicate with a remote IP subnet and need to add an additional remote IP subnet for a VoIP line, you should add a static route. 


DO NOT configure a Gateway on more than one LAN interface. This is known to cause communication and other issues on a Core processor.


To learn more about static routing, see the Addressing & Routing topic in Q-SYS Help.