Troubleshooting | USB Bridge Name property missing in Designer
Learn how to troubleshoot the issue of not being able to adjust the USB bridge name for your Q-SYS device.
Affected Products
Hardware Model/Series |
All Q-SYS devices with USB Bridging |
Software |
Problem | Symptoms
USB Bridge Name is unavailable in Properties.
Causes | Verification
This property is hidden when Zoom Compatibility is Enabled for the USB Bridging component.
Solution | Workaround
To allow adjustment of the USB Bridge Name, Zoom Compatibility must be Disabled in the component properties.
Note
If Zoom Compatibility is required for the system, the USB Bridge Name cannot be adjusted.
For more information see the Zoom Compatibility topic in Q-SYS Help.