How To | Activating HDMI/SDI streams on NC and PTZ cameras
Learn how to turn on HDMI/SDI streams on Q-SYS Cameras
Procedure
The NC and PTZ cameras have the ability to send their camera feed out the HDMI or SDI on rear of the camera in addition to sending camera feed over the network to QSYS.
The default state for the HDMI/SDI output is disabled and this feature will need to be enabled.
This feature can be activated using SDI/HDMI Enable button under the imaging tab of the camera status component.
The imaging tab has an option for SDI/HDMI Video Format.
Note
The NC camera imaging tab also has a mode button to select SDI or HDMI. It also gives SDI options for Level A/B.
Example
