Error / Status | Single Ended Channel Cannot be Connected to 70/100v Speaker
Learn why it is not possible to connect a single ended channel to a 70/100v speaker and understand the error or status associated with this connection.
Affected Products
Hardware Model/Series |
SPA-Qf 60x4 & SPA-Qf 60x2 |
Software |
9.8+ |
Message
Definition | Causes
The SPA-Q amplifier cannot output 4 channels utilizing High Impendence (70/100v) due to the power requirements of High Impedance Speakers.
Solution | Workaround
The workaround is to put the speaker into 2 channel Bridged mode.
While disconnected from the Core, select the Amplifier Output component and change the property for Channel Configuration from its default of "A B C D 4 Channel" to "A+B C+D 2 Channel, A B Bridged C D Bridged".
After changing you will be able to “Save to Core and Run”.