Awareness | LED Status - unHX2D
Gain insight into the status of unHX2D systems and tips for increasing awareness of LEDs.
Information
The front panel of the unHX2D features 8 bicolor LEDs used to indicate various device information and status. Some of these indications may occur simultaneously.
| Front Panel Indicator | LED State | Status |
|---|---|---|
|
POWER |
Power LED flashing GREEN continuously | Identify |
|
SYS / ERROR / SYNC |
flashing GREEN | Find Unit activated (8 seconds) |
|
POWER |
solid RED after boot | Critical Error |
|
ERROR |
solid RED | Critical Dante/AES67 processor failure |
|
ERROR |
solid AMBER | Dante/AES67 firmware corrupt |
|
SYNC |
solid AMBER | Clock is synchronizing |
|
SYNC |
solid RED | Loss of synchronization Outputs are muted |
|
SYNC |
solid GREEN | Synced Slave |
|
SYNC |
flashing GREEN | Master |
|
HDMI IN |
solid GREEN | HDCP enabled |
|
HDMI IN / OUT |
solid GREEN | HDCP enabled and connected to sink device |
|
HDMI IN |
flashing AMBER | HDCP disabled |
|
SOURCE |
solid GREEN | HDMI In routed to Dante/AES67 Outputs 1 & 2 |
|
SOURCE |
solid AMBER | Mixed input sources routed to Dante/AES67 Outputs 1 & 2 |
|
SOURCE |
solid RED | SPDIF Input is routed to Dante/AES67 Outputs 1 & 2 |
|
FORMAT |
solid AMBER | EDID set for "Copy Thru" and can carry non-PCM multichannel audio |
|
FORMAT |
solid GREEN | EDID set for PCM |
For more information, see the unHX2D user manual.