Awareness | LED Status - Axon D2i
Gain insight into the functionality and features of the Axon D2i LED status indicator for better awareness and understanding.
Information
The D2i is equipped with status reporting features. Upon power up, the front panel LEDs will light solid yellow then change white for 3 seconds upon succeeding. The device will then change to STATUS mode if no audio signal is present after 5 seconds. The LED states below are reflected when in STATUS mode. The status LEDs may be disabled using Attero Tech by QSC unIFY Control Panel.
| LED State | Status |
|---|---|
| Both Flashing Red | Critical Boot Error (contact Tech Support) |
| Both Flashing White | Identify |
| Both Flashing Blue | MCU Updating |
| Both Flashing Green | Factory Reset has been triggered |
| Both Flashing Yellow | Factory Mode |
| Top White / Bottom Off | Clock Master |
| Top Off / Bottom White | Clock Synced |
When audio signal is present, the device will change to SIGNAL mode and the LEDs will show the following states. These states apply to both panel LEDs.
| LED State | Status |
|---|---|
| Off | No Signal |
| Green | Has Signal |
| Red | Clipping |
For more information on the hardware and operations of the Axon D2i, refer to the user manual.